JAB MODUL  I/U modul, 4 ulaza, 4 izlaza. BUS JA-114HN View larger

BUS 4 I and 4 O I/Omodule JA-114HN

JA-114HN

New product

JABLOTRON ALARMS S.A.

JA-114HN BUS I/O module for JABLOTRON 100/100+: 4 wired inputs with configurable EOL balancing, 4 galvanically isolated PG outputs (500 mA/38 V each) and an auxiliary +U output (max. 200 mA), occupies 4 panel addresses.

More details

More info

JA-114HN is a bus I/O module for expanding JABLOTRON 100/100+ control panels with additional wired inputs and PG outputs. Each of the four inputs supports selectable EOL/balancing type and configurable resistor values, which simplifies reuse of existing wired detectors and retrofit installations.

The outputs (OUT1–OUT4) are galvanically isolated PG/OC outputs that switch to the C terminals; outputs are arranged so that each pair shares a common C terminal. The switching capability of each output is up to 500 mA at a maximum of 38 V. The auxiliary +U supply is protected by an electronic fuse and provides up to 200 mA for relays or powered accessories; the module reports a fault and disconnects the +U output in case of a short circuit.

Power is taken from the control panel bus (nominal 12 V; range 9…15 V). Typical current consumption is ~25 mA in standby plus the consumption of connected devices. Inputs are specified with a maximum measured resistance of 20 kΩ and recommended cable runs up to 100 m.

The JA-114HN occupies four addresses on the panel and features both front and rear tamper contacts. Its compact dimensions (77 × 40 × 31 mm) allow installation in JA-19xPL junction boxes or directly inside the control panel. The module complies with applicable EN standards for alarm components.

Key specifications

  • 4 wired inputs with configurable EOL balancing
  • 4 galvanically isolated PG outputs, each up to 500 mA / 38 V
  • Auxiliary +U output with electronic fuse, max. 200 mA
  • Occupies 4 addresses; front and rear tamper
  • Dimensions 77 × 40 × 31 mm; bus supply 12 V (9…15 V)

Download

Accessories

  • Reference: JA-190PL

    Brand: JABLOTRON ALARMS S.A.

    Installation box JA-190PL

    JA-190PL multipurpose ABS mounting box for JA-100 modules. Compact 90 × 90 × 34 mm enclosure with cable entries and internal mounting positions. IP40 housing and electrical isolation up to 400 V — suitable for tidy wiring and module fixation.

  • Reference: JA-194PL

    Brand: JABLOTRON ALARMS S.A.

    Installation box JA-194PL

    JA-194PL is a medium multipurpose installation box for Jablotron modules with front and rear tamper switches. Suitable for input/output modules, signal repeaters and hubs. Mountable on wall or directly onto a KU-68 back box. Size: 182×132×45 mm.

  • Reference: JA-195PL

    Brand: JABLOTRON ALARMS S.A.

    Installation box JA-195PL

    JA-195PL is a multipurpose installation box for Jablotron modules, fitted with front and rear tamper switches. Dimensions 102 × 102 × 34 mm; suitable for input/output modules and hubs.

7 other products in the same category:

Follow us on Facebook