Input modules for alarm systems
Input modules read states from sensors and devices of other manufacturers and forward those signals to the Jablotron system. Common examples are motion sensors, wind detectors, gas sensors and simple buttons.
They convert external inputs into events the alarm control can process, expanding monitoring and automation ...
Input modules for alarm systems
Input modules read states from sensors and devices of other manufacturers and forward those signals to the Jablotron system. Common examples are motion sensors, wind detectors, gas sensors and simple buttons.
They convert external inputs into events the alarm control can process, expanding monitoring and automation capabilities.
Well suited for seamless I/O integration and extending system features in residential and commercial installations.
-
Reference: JA-114HN
Brand: JABLOTRON ALARMS S.A.
BUS 4 I and 4 O I/Omodule JA-114HN
JA-114HN BUS I/O module for JABLOTRON 100/100+: 4 wired inputs with configurable EOL balancing, 4 galvanically isolated PG outputs (500 mA/38 V each) and an auxiliary +U output (max. 200 mA), occupies 4 panel addresses.
-
Reference: JA-111H-AD TRB
Brand: JABLOTRON ALARMS S.A.
Bus module for system control JA-111H-AD TRB
The JA-111H-AD TRB is an addressable BUS module for integrating and controlling external control devices in the JABLOTRON 100+ system. It supplies power from the panel BUS (12 V DC, 9–15 V), has three inputs (tamper, programmable, fault/secondary control) and supports PG control with activation time 0.1–300 s.
-
Reference: JA-112M
Brand: JABLOTRON ALARMS S.A.
BUS module for magnetic detectors JA-112M
The JA-112M is a BUS module for the JABLOTRON 100+ system that connects wired magnetic contacts. It provides two independent, configurable inputs (unbalanced, single/double balanced or roller mode) and supports cable runs up to 100 m.
-
Reference: JA-110M
Brand: JABLOTRON ALARMS S.A.
Module for magnetic detectors JA-110M
Bus module for magnetic door/window detectors with two independent inputs. Inputs programmable as NC/NO or using a balancing (EOL) resistor. Powered from the BUS, standby current ~3 mA, dimensions 40×100×22 mm.
-
Reference: JA-118M
Brand: JABLOTRON ALARMS S.A.
Module for magnetic detectors JA-118M
The JABLOTRON JA-118M is an addressable BUS module for the JABLOTRON 100 system providing 8 programmable inputs for wired magnetic sensors. Each input supports NC, balanced/impulse or roller‑shutter modes. Max loop length 100 m; fits JA-190PL or KU-68.
-
Reference: JA-116H
Brand: JABLOTRON ALARMS S.A.
BUS expander – 16 inputs JA-116H
The JA-116H is a BUS expander for JABLOTRON 100+ that powers and connects up to 16 wired detectors with contact outputs. Inputs can be set as single- or double-balanced and as NC/NO; selectable end resistors: 1k, 2k2, 3k3, 4k7, 5k6, 10k. Fits inside JA-106K or a tamper-protected installation box and occupies 16 system addresses.
-
Reference: JA-111H TRB
Brand: JABLOTRON ALARMS S.A.
Module interface JA-111H TRB
JA-111H TRB is a BUS module for integrating wired detectors into the JABLOTRON 100+ system. It supplies the detector (max 50 mA) and reports alarm, tamper and fault/masking; supports latch and pulse activation.
-
Reference: JA-162M
Brand: JABLOTRON ALARMS S.A.
JA-162M Wireless module with two universal inputs
The JA-162M is a Jablotron wireless module with two independent universal inputs and an option to connect a tamper contact. It allows wired detectors to be integrated into the JA-100 system without separate power wiring.
