View larger
JB-110N PG power output module
BUS-powered PG output module for JABLOTRON 100+. Provides a single switching relay contact configurable as NO or NC, rated for resistive loads up to 16 A. The PG output number is set by DIP switches; powered from the control panel BUS (12 V).
More info
The JB-110N is a BUS PG power output module designed for the JABLOTRON 100+ system. It supplies one switching contact via an output relay and is intended for switching lighting, fans and similar loads.
The relay can be set to NO (normally open) or NC (normally closed). The corresponding PG output (PG 1–128) is configured using DIP switches. The module is powered from the control panel BUS (12 V DC, range 9–15 V) and does not occupy an address in the security system.
Key technical specifications:
- Power: BUS 12 V DC (9…15 V)
- Current consumption: 5 mA (relay off) / 45 mA (relay on)
- Relay contact rating – max switched voltage: 250 V AC
- Maximum current (resistive): 16 A; inductive (cosφ=0.4): 8 A
- Minimum switched DC power: 0.5 W
- Dimensions: 78 x 40 x 20 mm; weight: 34 g
The module should be installed in a JA‑19xPL mounting box or inside the control panel enclosure to meet protection class II requirements. Installation and electrical connections must be performed by a trained and authorized technician. JB-110N provides a simple, reliable PG-controlled power output solution for Jablotron 100+ installations.
Accessories
-
Reference: JA-190PL
Brand: JABLOTRON ALARMS S.A.
Installation box JA-190PL
JA-190PL multipurpose ABS mounting box for JA-100 modules. Compact 90 × 90 × 34 mm enclosure with cable entries and internal mounting positions. IP40 housing and electrical isolation up to 400 V — suitable for tidy wiring and module fixation.
-
Reference: JA-194PL
Brand: JABLOTRON ALARMS S.A.
Installation box JA-194PL
JA-194PL is a medium multipurpose installation box for Jablotron modules with front and rear tamper switches. Suitable for input/output modules, signal repeaters and hubs. Mountable on wall or directly onto a KU-68 back box. Size: 182×132×45 mm.
-
Reference: JA-195PL
Brand: JABLOTRON ALARMS S.A.
Installation box JA-195PL
JA-195PL is a multipurpose installation box for Jablotron modules, fitted with front and rear tamper switches. Dimensions 102 × 102 × 34 mm; suitable for input/output modules and hubs.
10 other products in the same category:
-
Reference: JA-110N
Manufacturer: JABLOTRON ALARMS S.A.
Bus power output module JA-110N
PG, BUS, a switching relay (16 A) with NO or NC modes.
-
Reference: JA-111N
Manufacturer: JABLOTRON ALARMS S.A.
BUS signal output module JA-111N
Bus signal output module, PG, offers a switching relay (2 A/60V DC) with NO...
-
Reference: JA-150N
Manufacturer: JABLOTRON ALARMS S.A.
Wireless output module JA-150N
High power wireless PG output module (16 A / 230 V AC).
-
Reference: JA-151N
Manufacturer: JABLOTRON ALARMS S.A.
Wireless output modulei JA-151N
Wireless signal output module PG (1 A/24 V DC)
-
Reference: JA-118N
Manufacturer: JABLOTRON ALARMS S.A.
Eight channel module JA-118N
Output module provides outputs for signaling the status of 8 sections,...
-
Reference: JA-110N-DIN
Manufacturer: JABLOTRON ALARMS S.A.
BUS DIN power output module JA-110N-DIN
PG output module for DIN rail,provides a power relay output.
-
Reference: JA-120N
Manufacturer: JABLOTRON ALARMS S.A.
Module for electric lock JA-120N
Bus module for control of an electric lock with batteries
-
Reference: JB-111N
Manufacturer: JABLOTRON ALARMS S.A.
Output module JB-111N
Bus signal PG output module
-
Reference: JB-118N
Manufacturer: JABLOTRON ALARMS S.A.
Eight ch. output module JB-118N
Bus signal PG output module - 8 outputs
-
Reference: JB-165N-PLUG
JAB JB-165N-PLUG Smart wireless plug with consumption measurement
The JAB JB-165N-PLUG is a wireless Schuko smart socket for JABLOTRON systems...
