GD-04P Link kabel View larger

GD-04P Link Cable

GD-04P

New product

JABLOTRON ALARMS S.A.

The GD-04P link cable connects a PC via USB for local programming and configuration of Jablotron devices (CU-08, CA-210x, GD-04). Use with the free C‑Link (CU/CA) or GD‑Link (GD‑04) software. USB driver and Windows are required.

More details

More info

GD-04P is the official Jablotron link cable for service-level programming. It provides a USB connection between a PC and Jablotron units (CU‑08 Tracer, CA‑210x series car alarms and the GD‑04 David GSM/GPS communicator) for local configuration and parameter transfer.

Usage: CU‑08 and CA‑210x units are programmed with the free C‑Link application; the GD‑04 communicator uses the GD‑Link application. A proper USB driver must be installed on Windows (XP or newer) so the PC can detect the connected device.

The cable is intended for local setup and diagnostics over USB. Remote configuration and server-based communication are available via GSM per the device documentation. The GD‑04P is supplied as original service equipment and should be used following the manufacturer’s installation and safety instructions.

Compatibility and standards: intended for use with CU‑08, CA‑210x and GD‑04; documentation notes EMC compliance to EN 55022 and EN 50130‑4. Do not modify device parameters without appropriate knowledge or instructions.

  • Purpose: local programming and diagnostics
  • Software: C‑Link (CU/CA), GD‑Link (GD‑04)
  • Requirements: USB driver installation, Windows OS

30 other products in the same category:

Follow us on Facebook