The CP-201T-NW resistor temperature sensor is designed for universal measurement of liquids, gases and solids. It uses an NTC 10 kΩ element (B25/100 = 3455 K), operates from -25 °C to +105 °C, features a brass probe, IP67 protection and a 3 m cable.
Warning: Last items in stock!
Availability date:
Log in to see prices
CP-201T-NW Resistor Temperature Sensor
The CP-201T-NW resistor temperature sensor is designed for universal measurement of liquids, gases and solids. It uses an NTC 10 kΩ element (B25/100 = 3455 K), operates from -25 °C to +105 °C, features a brass probe, IP67 protection and a 3 m cable.
Recipient :
* Required fields
or Cancel
The CP-201T-NW is a resistor temperature sensor intended for general-purpose temperature detection in liquids, gases and solids. It can be mounted to pipe surfaces with appropriate fittings for reliable surface measurements. The operating range is -25 °C to +105 °C and must not be exceeded, even temporarily.
Based on an NTC 10 kΩ element, the sensor is two-wire and compatible with controllers that accept NTC 10 kΩ probes. The brass housing and IP67 rating provide robust protection against moisture; the 3 m unshielded PVC cable simplifies installation.
The CP-201T-NW is suitable for use with Jablotron TM-201 series modules (e.g. TM-201A) and any control unit compatible with NTC 10 kΩ sensors. Avoid exposing the probe to aggressive chemicals or mechanical damage. For pipe-surface measurements use appropriate clamps or holders to ensure good thermal contact.
Note: Observe the specified temperature and electrical limits to ensure measurement accuracy and device safety.
Reference: JA-SOLO C3
Manufacturer: JABLOTRON ALARMS S.A.
JA-SOLO C3 test spray for checking functionality of CO detectors EI208W and...
Reference: JS-7904
Manufacturer: JABLOTRON ALARMS S.A.
Replacement corridor lens for Jablotron JA/JS PIR detectors. Creates a narrow...
Reference: JS-7910
Manufacturer: JABLOTRON ALARMS S.A.
JS-7910 is an alternative "pet" lens for PIR detectors that reduces false...
Reference: JS-7902
Manufacturer: JABLOTRON ALARMS S.A.
The JS-7902 is a replacement curtain lens for PIR motion detectors. It...
Reference: JA-193PL-F-M-W
Manufacturer: JABLOTRON ALARMS S.A.
White aesthetic frame for medium (M) JA-193PL wall mounting box; for JA-1x1P...
Reference: JA-191PL
Manufacturer: JABLOTRON ALARMS S.A.
JA-191PL articulated bracket for JA-1x1P and JA-1x2P PIR detectors. Allows...
Reference: JA-193PL-F-S-G
Manufacturer: JABLOTRON ALARMS S.A.
Gray mounting frame for small (S) wall-mount PIR box. Used with...
Reference: JA-193PL-F-S-W
Manufacturer: JABLOTRON ALARMS S.A.
White cover frame JA-193PL-F-S-W for the JA-193PL-BOX-S small wall-mount...
Reference: JA-193PL-F-M-G
Manufacturer: JABLOTRON ALARMS S.A.
JA-193PL-F-M-G is a grey medium mounting frame for the recessed detector box...
Reference: SD-TESTER
Manufacturer: JABLOTRON ALARMS S.A.
SD-TESTER Test Spray Smoke Sabre, 150 ml — designed for functional testing of...
Reference: GBT-212
Manufacturer: JABLOTRON ALARMS S.A.
Handheld glass-break simulator for testing acoustic detectors. GBT-212 senses...
Reference: JS-7920
Manufacturer: JABLOTRON ALARMS S.A.
JS-7920 is an alternative grey lens for PIR detectors of the JA-1x2P and...
Reference: JA-196PL-L
Manufacturer: JABLOTRON ALARMS S.A.
The JA-196PL-L bracket is designed for installing dual PIR+MW detectors...
Reference: GS-208-CO
Manufacturer: JABLOTRON ALARMS S.A.
GS-208-CO is a plug‑in wired module for direct integration into Ei208W or...
Reference: PLV-P-ST
Manufacturer: JABLOTRON ALARMS S.A.
PLV-P-ST is a universal circular ceiling spacer Ø126 mm for smoke, heat and...
Reference: BAT-3V0-CR2354
Manufacturer: JABLOTRON ALARMS S.A.
CR2354 lithium (Li‑MnO2) coin cell, nominal 3.0 V and 0.56 Ah (560 mAh)....
Reference: JA-150TX-UNI
The Jablotron JA-150TX-UNI is a compact wireless universal transmitter for...