List of products by manufacturer JABLOTRON ALARMS S.A.
-
Reference: JA-110Z-C
Brand: JABLOTRON ALARMS S.A.
Bus terminal module JA-110Z-C
Bus terminal module for the JABLOTRON 100 BUS. Designed to connect JA‑100 bus lines; fits into the JA‑190PL mounting box. Maximum voltage 42 V AC / 60 V DC, maximum current 2 A. Simplifies wiring, branching and later servicing.
-
Reference: JA-156J
Brand: JABLOTRON ALARMS S.A.
Button for silent alarm JA-156J
Wireless button JA-156J
-
Reference: JA-112J
Brand: JABLOTRON ALARMS S.A.
Button JA-112J
BUS emergency/control wall-mounted button
-
Reference: JA-158J
Brand: JABLOTRON ALARMS S.A.
Button JA-158J / wireless
JA-158J wireless wall button with bi‑directional communication. Allows panic activation, output control and doorbell use with LED/beep confirmation. Powered by 2× CR2032. Compatible with JA-103K and JA-107K control panels.
-
Reference: CA-2103SET P
Brand: JABLOTRON ALARMS S.A.
CA-2103SET P Car alarm set CA-2103, CA-550, JA-185P and PLV-JA85PG
The set includes the CA-2103 car alarm including full entry protection (doors, engine cover, hood), the CA-550 tilt sensor that detects any car movement including vehicle towing and the JA-185P wireless PIR motion detector for interior protection. An additional gray plastic cover for the interior in different colors is included.
-
Reference: CA-2103SET VAN
Brand: JABLOTRON ALARMS S.A.
CA-2103SET VAN Auto alarm set CA-2103, CA-550, 2x JA-185P i JA-150M
-
Reference: CA-340PRG
Brand: JABLOTRON ALARMS S.A.
CA-340PRG Adjustment tool
Programming tool for diagnostics and adjustment of car alarms CA-340 and CA-345.
-
Reference: CA-345
Brand: JABLOTRON ALARMS S.A.
CA-345 Car alarm with local signaling and immobilizer
The CA-345 car alarm is designed to be installed inside a car with a vehicle voltage of 12 as well as 24 V and a grounded negative pole. It is protected against polarity reversal, the activation inputs are protected against short circuit and voltage.
-
Reference: CA-551
Brand: JABLOTRON ALARMS S.A.
CA-551 Tilt Detector
The CA-551 tilt detector detects the movement of a car in three axes. The detector does not use mechanical parts. Detection is achieved by electronic acceleration measurement. The digital analysis used in this detector ensures high resistance to false alarms.
-
Reference: CC-03
Brand: JABLOTRON ALARMS S.A.
Cable - Jablotron ColorCode CC-03 / 250 m
Jablotron CC-03 ColorCode BUS installation cable, EasyReel 250 m. Configuration: 1 × 2 × 20 AWG (0,5 mm2) and 3 × 2 × 24 AWG (0,2 mm2). Wire colours match JABLOTRON terminals; cable marked every 1 m.
-
Reference: CC-01
Brand: JABLOTRON ALARMS S.A.
Cable- Jablotron ColorCode CC-01 - 300 m
Jablotron CC-01 ColorCode BUS installation cable, 300 m. Available as 1 × 2 × 24 AWG (0.2 mm²) or 1 × 2 × 20 AWG (0.5 mm²); each metre is marked and the four conductors are colour-coded to system terminals.
-
Reference: CC-02
Brand: JABLOTRON ALARMS S.A.
Cable- Jablotron ColorCode CC-02 / 300 m
Jablotron CC-02 ColorCode BUS installation cable, 2 × 2 × 24 AWG (0.2 mm2). Supplied in 300 m box, black marking every metre; conductor colours match Jablotron BUS terminals.
-
Reference: EI208DW
Brand: JABLOTRON ALARMS S.A.
Carbon monoxide detector EI208DW
Stand‑alone EI208DW carbon monoxide detector with LCD and electrochemical sensor. Displays CO concentration from 20 ppm, powered by a sealed 10‑year lithium battery, gives acoustic (85 dB @3 m) and visual alarms; supports AudioLINK and optional RadioLINK+ interconnect.
-
Reference: EI208W
Brand: JABLOTRON ALARMS S.A.
Carbon monoxide detector EI208W
Standalone carbon monoxide (CO) detector with electrochemical sensor and sealed-for-life 10‑year lithium battery.
-
Reference: JA-14K
Brand: JABLOTRON ALARMS S.A.
Control panel JA-14K
JA‑14K control panel for the JA‑10 series with built‑in LAN communicator. Designed for apartments, family houses and small businesses; supports BUS and wireless devices and remote operation via MyJABLOTRON.
