BUS terminal module JA-110Z-A

Overview: The JA-110Z-A is designed to split and interconnect BUS lines of the JABLOTRON 100+ system. It features a pair of tamper contacts for protection and additional terminal blocks for connecting conventional wired zones.

Installation & enrolment: The module is supplied for installation in the JA-190PL box. The unit must be enrolled in the system via F-Link or by entering its production code to enable tamper reporting and BUS voltage-loss monitoring; if not enrolled it functions solely as a passive splitter.

BUS handling & isolation: BUS terminals are wired in parallel so there is no designated input or output. If any branch is routed outside the protected premises, a JA-110T BUS isolator should be used on that branch to protect against tampering without affecting the rest of the BUS.

Technical specifications:

• Power from control panel BUS: 12 V (9…15 V)
• Current consumption (standby): 5 mA (plus connected detectors)
• Dimensions: 76 x 54 x 30 mm
• Classification: EN 50131-1, EN 50131-3 Grade II
• Operating temperature: -10 °C to +40 °C
• Complies with EN 50130-4, EN 55022

Note: Installation must be performed by a trained, certified technician. The module occupies one device position in the JABLOTRON 100+ system.