JAB Detektor, magnetni, bežièni, mini JA-151M-GR
View larger

JAB Detektor, magnetni, bežièni, mini JA-151M-GR

JA-151M-GR

New product

The JA-151M-GR is a mini wireless magnetic detector for door and window opening detection. Powered by a CR2032 battery (not included) with typical life ~2 years (up to 20 activations/day). Operates at 868.1 MHz and occupies one address in the system. Grey housing.

More details

More info

Product overview

The JA-151M-GR is a compact wireless magnetic detector designed to detect opening of doors and windows in residential and commercial installations. Its small footprint allows mounting on narrow frames while keeping a discreet appearance in grey.

The device is addressable and occupies a single position in the JABLOTRON 100/100+ alarm system. Radio communication uses the 868.1 MHz band (JABLOTRON protocol) with a maximum ERP of 3 mW.

Power comes from a single CR2032 lithium cell (3.0 V / 0.2 Ah) – battery not included. Typical battery life is approximately 2 years with up to 20 activations per day. The detector monitors battery voltage and reports low battery to the control panel.

Installation and tamper: the detector includes a cover tamper and a permanent magnet that may be mounted on either side of the detector. Enrollment can be performed by entering the serial number or using the manufacturer’s programming tools. Battery replacement and commissioning should be carried out by a qualified technician, preferably with the control panel in service mode.

Key specifications

  • Power: 1 × CR2032 (3.0 V / 0.2 Ah), battery not included
  • Typical battery life: approx. 2 years (max. 20 activations/day)
  • Frequency: 868.1 MHz (JABLOTRON protocol)
  • Max. RF power (ERP): 3 mW
  • Communication range: approx. 300 m (open area)
  • Dimensions: transmitter 27 × 55 × 16 mm, magnet 16 × 55 × 16 mm
  • Operating temperature: -10 °C to +40 °C
  • Classification: Grade 2 according to EN 50131-1
  • Housing color: grey

Maintenance note: when the detector signals low battery, replace the cell within the timeframe recommended by the manufacturer; verify operation after replacement. Installation and system enrollment should be performed by an authorized installer.

30 other products in the same category:

Follow us on Facebook