JAB Pristupni modul sa RFID čitačem, vanjski, BUS JA-122E View larger

Access module with RFID reader JA-122E

JA-122E

New product

JABLOTRON ALARMS S.A.

Outdoor BUS RFID reader JA-122E for the JABLOTRON 100 system. Reads JABLOTRON 100 and EM Unique 125 kHz cards/tokens and is used to trigger a PG output for access control (e.g. electric lock). IP65, IK08, 3.0 m connection cable.

More details

Data sheet

Connection method BUS

More info

JA-122E – Outdoor BUS RFID reader

The JA-122E is a compact outdoor, BUS‑powered RFID reader designed for integration with the JABLOTRON 100/100+ control panels. It provides contactless card/token reading and optical status indication via built‑in LEDs. The reader itself does not contain a keypad – its primary role is to activate a PG output for access control devices such as electric locks.

The unit occupies one BUS address in the system and is powered directly from the control panel bus (9…15 V), simplifying installation without the need for a separate power supply. Current consumption is approximately 15 mA in standby/for cable selection.

Constructed for external installation, JA-122E features IP65 ingress protection and IK08 mechanical resistance. The operating temperature range is -25 °C to +60 °C and the reader includes a 3.0 m factory-fitted connection cable.

Key specifications

  • RFID frequency: 125 kHz
  • Supported cards: JABLOTRON 100 and EM Unique 125 kHz
  • Dimensions: 46 x 151.5 x 22.5 mm
  • Power: from control panel digital bus (9…15 V)
  • Current consumption: 15 mA (standby / cable selection)
  • Connection cable length: 3.0 m
  • Protection: IP65, Mechanical strength EN 50102 IK08
  • Operating temperature: -25 °C to +60 °C
  • Operational environment: EN 50131-1 IV. Outdoor general, Classification Grade 2

JA-122E complies with relevant alarm and radio standards and is suitable for reliable outdoor access points where a robust, BUS‑connected RFID reader is required. LEDs indicate section status (armed/disarmed/fault/service); the unit also includes tamper detection to signal unauthorized removal.

For correct operation, mount the reader to avoid strong electromagnetic interference and ensure proper BUS wiring to the JABLOTRON control panel. The reader is intended as a reading/access module and not as a full keypad.

Download

Accessories

16 other products in the same category:

Follow us on Facebook