JA-100+ motion detectors are intended to detect unauthorized movement inside homes and businesses and to report such events to the alarm control panel. They form a primary detection layer that enables automatic alerting and response.
Commonly available in PIR and hybrid variants, these ...
JA-100+ motion detectors are intended to detect unauthorized movement inside homes and businesses and to report such events to the alarm control panel. They form a primary detection layer that enables automatic alerting and response.
Commonly available in PIR and hybrid variants, these detectors are designed to balance sensitivity and false-alarm resistance for everyday security scenarios.
Select a detector according to room type (living room, corridor, warehouse) and environmental factors such as pets. Options with pet-immunity and different mounting/lens accessories allow tailoring coverage to the space.
Check connectivity (wired bus vs wireless) to ensure compatibility with your JA-100+ control unit and the available configuration options in the system software.
Position detectors at recommended heights, avoiding direct view of windows, heaters or strong airflows. Professional installation is recommended for correct enrollment, tamper setup and optimal field coverage.
Before purchase verify model compatibility with your control unit and whether alternative lenses or corridor optics are available for your layout.
Reference: JA-151P-WW
Brand: JABLOTRON ALARMS S.A.
Jablotron JA-151P-WW is a wireless PIR motion detector with SMART WATCH to acknowledge alarms and extend battery life. Addressable in JABLOTRON 100+, it features pulse activation, two false-alarm sensitivity levels and can control programmable PG outputs.
Reference: JA-185P
Brand: JABLOTRON ALARMS S.A.
The Jablotron JA-185P is a compact wireless ceiling PIR motion detector for small rooms and vehicle interiors. It offers 360° coverage up to 5 m, operates on 868.1 MHz and is powered by a single LS(T)14500 lithium cell (3.6 V / 2.4 Ah). Addressable in the JABLOTRON 100 system, battery life is approx. 3 years.
Reference: JA-180P
Brand: JABLOTRON ALARMS S.A.
The Jablotron JA-180P is a wireless indoor PIR motion detector. It provides 120° / 12 m detection, communicates on 868.1 MHz (Jablotron protocol) with an open‑area range of ≈300 m, is powered by a CR14500 (AA) 3.6 V lithium battery and features a tamper contact. Typical battery life ≈3 years.
Reference: JA-160PC
Brand: JABLOTRON ALARMS S.A.
Wireless PIR motion detector with an integrated verification camera for the JABLOTRON 100 system. Captures dual‑exposure images (LQ 320×240 and HQ 640×480) and uses a visible flash for low‑light shots. Images are stored in internal memory and forwarded to the control panel and users; occupies one system address.
Reference: JA-110P
Brand: JABLOTRON ALARMS S.A.
Wired BUS PIR motion detector for interior protection; standard coverage 110° up to 12 m. Powered from the control panel BUS 12 V DC (9 ... 15 V). Optional SMART MEMORY indication (SMI) and interchangeable lenses JS-7904, JS-7906, JS-7901.
Reference: JA-111P-WG
Brand: JABLOTRON ALARMS S.A.
Bus PIR motion detector JA-111P-WG with a grey lens offering increased resistance to white light to reduce false alarms from car lights, lightning or reflections. Detection coverage 90°/12 m; addressable in the JABLOTRON 100+ system and occupies one system position. Two-level false-alarm sensitivity.
Reference: JA-111P-WW
Brand: JABLOTRON ALARMS S.A.
The JA-111P-WW is an addressable BUS PIR motion detector for the JABLOTRON 100+ system. It provides a guaranteed detection coverage of 90°/12 m, two selectable false-alarm immunity levels and can control programmable PG outputs.
Reference: JA-120PC
Brand: JABLOTRON ALARMS S.A.
Bus-powered PIR motion detector with an integrated verification camera. Captures colour stills (LQ 320×240, HQ 640×480) with flash and IR for night shots, stores them in internal memory and transmits via the control panel. Occupies one address in JABLOTRON 100.
Reference: JA-120PB
Brand: JABLOTRON ALARMS S.A.
JA-120PB is a bus combined detector that integrates a PIR motion sensor and an acoustic/pressure glass‑break (GBS) sensor in one housing. Designed for indoor protection and occupies two consecutive addresses on the JABLOTRON 100 bus.
Reference: JA-180W
Brand: JABLOTRON ALARMS S.A.
The JA-180W is an addressable Jablotron wireless motion detector combining a passive PIR sensor with a 9.35 GHz MW module. PIR triggers activation of the MW unit for confirmation, reducing false alarms. Alternative lenses JS-7904, JS-7906 and JS-7901 allow detection tuning.
Reference: JA-122PW
Brand: JABLOTRON ALARMS S.A.
JA-122PW is a bus device for the JABLOTRON 100+ system combining passive infrared (PIR) and microwave (MW) detection to minimize false alarms. It operates on 12 V DC (9–15 V), has low current consumption and is recommended to be mounted at 2.2–2.5 m.
Reference: JA-162PW
Brand: JABLOTRON ALARMS S.A.
The JA-162PW is a wireless dual PIR & MW motion detector for the JABLOTRON 100+ system that minimizes false alarms by confirming PIR activations with microwave detection. Operates on 2×CR123A batteries (approx. 4 years) with detection range up to 12 m.
Reference: JA-162PW (G)
Brand: JABLOTRON ALARMS S.A.
JAB JA-162PW (G) is a wireless dual PIR & MW motion detector combining passive infrared and microwave sensing to minimise false alarms. The grey lens increases white-light immunity up to 10,000 lux; detection range up to 12 m. Powered by 2×CR123A (typ. 4 years).
Reference: JA-122PW (G)
Brand: JABLOTRON ALARMS S.A.
JA-122PW (G) is a JABLOTRON 100+ bus dual PIR & MW motion detector. Grey lens offers white-light immunity up to 10000 lux; detection coverage up to 12 m.
Reference: JA-112P-AN
Brand: JABLOTRON ALARMS S.A.
Addressable bus PIR motion detector for the JABLOTRON 100+. Guarantees 90°/12 m coverage, impulse activation and two-level false-alarm adjustment. Designed for indoor use where discreet, high-quality detection is required.