JA-SOLO C3 test spray for checking functionality of CO detectors EI208W and EI208DW. Supplied with insulating application sleeves to prevent dispersion of the test aerosol.
Warning: Last items in stock!
Availability date:
Log in to see prices
Test spray for CO detectors JA-SOLO C3
JA-SOLO C3 test spray for checking functionality of CO detectors EI208W and EI208DW. Supplied with insulating application sleeves to prevent dispersion of the test aerosol.
Recipient :
* Required fields
or Cancel
JA-SOLO C3 is a test spray designed to verify the operation of Jablotron CO detectors, for example EI208W and EI208DW. The spray content is sufficient for approximately 50 test doses. The kit includes insulating sleeves that limit undesired dispersion of the aerosol outside the detector area.
Fit an insulating sleeve over the detector, expose the prepared opening and apply the spray nozzle for roughly 1 second. After the detector triggers, you can mute the detector siren by pressing the TEST button. If there is no activation within one minute, repeat the test; repeated failure may indicate a faulty detector and should be reported to service personnel.
Do not smoke or use near open flames while testing. Ensure good ventilation. Avoid contact with skin and eyes; seek medical attention if inhalation or exposure causes health issues. Store in a cool, well-ventilated place and keep away from children. Protect from temperatures above 50 °C. Do not puncture the canister or dispose of it in fire; hand over empty containers to an approved disposal facility.
Reference: JS-7904
Manufacturer: JABLOTRON ALARMS S.A.
Replacement corridor lens for Jablotron JA/JS PIR detectors. Creates a narrow...
Reference: JS-7910
Manufacturer: JABLOTRON ALARMS S.A.
JS-7910 is an alternative "pet" lens for PIR detectors that reduces false...
Reference: JS-7902
Manufacturer: JABLOTRON ALARMS S.A.
The JS-7902 is a replacement curtain lens for PIR motion detectors. It...
Reference: JA-193PL-F-M-W
Manufacturer: JABLOTRON ALARMS S.A.
White aesthetic frame for medium (M) JA-193PL wall mounting box; for JA-1x1P...
Reference: JA-191PL
Manufacturer: JABLOTRON ALARMS S.A.
JA-191PL articulated bracket for JA-1x1P and JA-1x2P PIR detectors. Allows...
Reference: JA-193PL-F-S-G
Manufacturer: JABLOTRON ALARMS S.A.
Gray mounting frame for small (S) wall-mount PIR box. Used with...
Reference: JA-193PL-F-S-W
Manufacturer: JABLOTRON ALARMS S.A.
White cover frame JA-193PL-F-S-W for the JA-193PL-BOX-S small wall-mount...
Reference: JA-193PL-F-M-G
Manufacturer: JABLOTRON ALARMS S.A.
JA-193PL-F-M-G is a grey medium mounting frame for the recessed detector box...
Reference: SD-TESTER
Manufacturer: JABLOTRON ALARMS S.A.
SD-TESTER Test Spray Smoke Sabre, 150 ml — designed for functional testing of...
Reference: GBT-212
Manufacturer: JABLOTRON ALARMS S.A.
Handheld glass-break simulator for testing acoustic detectors. GBT-212 senses...
Reference: JS-7920
Manufacturer: JABLOTRON ALARMS S.A.
JS-7920 is an alternative grey lens for PIR detectors of the JA-1x2P and...
Reference: JA-196PL-L
Manufacturer: JABLOTRON ALARMS S.A.
The JA-196PL-L bracket is designed for installing dual PIR+MW detectors...
Reference: GS-208-CO
Manufacturer: JABLOTRON ALARMS S.A.
GS-208-CO is a plug‑in wired module for direct integration into Ei208W or...
Reference: PLV-P-ST
Manufacturer: JABLOTRON ALARMS S.A.
PLV-P-ST is a universal circular ceiling spacer Ø126 mm for smoke, heat and...
Reference: BAT-3V0-CR2354
Manufacturer: JABLOTRON ALARMS S.A.
CR2354 lithium (Li‑MnO2) coin cell, nominal 3.0 V and 0.56 Ah (560 mAh)....
Reference: CP-201T-NW
Manufacturer: JABLOTRON ALARMS S.A.
The CP-201T-NW resistor temperature sensor is designed for universal...
Reference: JA-150TX-UNI
The Jablotron JA-150TX-UNI is a compact wireless universal transmitter for...