The JA-196PL-L bracket is designed for installing dual PIR+MW detectors JA-122PW and JA-162PW into plasterboard or brick walls. It allows a partly flush-mounted finish for a tidy, low-profile appearance. Available in white and grey; frame mounting holes 65 x 157 mm.
Warning: Last items in stock!
Availability date:
Log in to see prices
JA-196PL-L The dual PIR and MW wall holder
The JA-196PL-L bracket is designed for installing dual PIR+MW detectors JA-122PW and JA-162PW into plasterboard or brick walls. It allows a partly flush-mounted finish for a tidy, low-profile appearance. Available in white and grey; frame mounting holes 65 x 157 mm.
Recipient :
* Required fields
or Cancel
JA-196PL-L is a wall bracket for partly recessed mounting of dual PIR and MW motion detectors (JA-122PW, JA-162PW). It is intended for use where a neater, less protruding installation is required on plasterboard or masonry walls.
The bracket retains the detector's functional and service access while visually integrating the device into the wall surface. It is useful for installations in interiors where appearance is important but full recessed installation is not possible.
This bracket is an installation accessory only and does not alter detector electrical or sensing characteristics. Ensure the mounting hole pattern and fasteners match the wall material and local installation practice. Use appropriate screws/plugs for plasterboard or masonry as required.
Reference: JA-SOLO C3
Manufacturer: JABLOTRON ALARMS S.A.
JA-SOLO C3 test spray for checking functionality of CO detectors EI208W and...
Reference: JS-7904
Manufacturer: JABLOTRON ALARMS S.A.
Replacement corridor lens for Jablotron JA/JS PIR detectors. Creates a narrow...
Reference: JS-7910
Manufacturer: JABLOTRON ALARMS S.A.
JS-7910 is an alternative "pet" lens for PIR detectors that reduces false...
Reference: JS-7902
Manufacturer: JABLOTRON ALARMS S.A.
The JS-7902 is a replacement curtain lens for PIR motion detectors. It...
Reference: JA-193PL-F-M-W
Manufacturer: JABLOTRON ALARMS S.A.
White aesthetic frame for medium (M) JA-193PL wall mounting box; for JA-1x1P...
Reference: JA-191PL
Manufacturer: JABLOTRON ALARMS S.A.
JA-191PL articulated bracket for JA-1x1P and JA-1x2P PIR detectors. Allows...
Reference: JA-193PL-F-S-G
Manufacturer: JABLOTRON ALARMS S.A.
Gray mounting frame for small (S) wall-mount PIR box. Used with...
Reference: JA-193PL-F-S-W
Manufacturer: JABLOTRON ALARMS S.A.
White cover frame JA-193PL-F-S-W for the JA-193PL-BOX-S small wall-mount...
Reference: JA-193PL-F-M-G
Manufacturer: JABLOTRON ALARMS S.A.
JA-193PL-F-M-G is a grey medium mounting frame for the recessed detector box...
Reference: SD-TESTER
Manufacturer: JABLOTRON ALARMS S.A.
SD-TESTER Test Spray Smoke Sabre, 150 ml — designed for functional testing of...
Reference: GBT-212
Manufacturer: JABLOTRON ALARMS S.A.
Handheld glass-break simulator for testing acoustic detectors. GBT-212 senses...
Reference: JS-7920
Manufacturer: JABLOTRON ALARMS S.A.
JS-7920 is an alternative grey lens for PIR detectors of the JA-1x2P and...
Reference: GS-208-CO
Manufacturer: JABLOTRON ALARMS S.A.
GS-208-CO is a plug‑in wired module for direct integration into Ei208W or...
Reference: PLV-P-ST
Manufacturer: JABLOTRON ALARMS S.A.
PLV-P-ST is a universal circular ceiling spacer Ø126 mm for smoke, heat and...
Reference: BAT-3V0-CR2354
Manufacturer: JABLOTRON ALARMS S.A.
CR2354 lithium (Li‑MnO2) coin cell, nominal 3.0 V and 0.56 Ah (560 mAh)....
Reference: CP-201T-NW
Manufacturer: JABLOTRON ALARMS S.A.
The CP-201T-NW resistor temperature sensor is designed for universal...
Reference: JA-150TX-UNI
The Jablotron JA-150TX-UNI is a compact wireless universal transmitter for...