The JS-7902 is a replacement curtain lens for PIR motion detectors. It narrows detection to a vertical curtain—suitable for doors, windows and very narrow passages. Typical range at 2.5 m mounting height is up to 10 m.
Warning: Last items in stock!
Availability date:
Log in to see prices
Curtain lens JS-7902
The JS-7902 is a replacement curtain lens for PIR motion detectors. It narrows detection to a vertical curtain—suitable for doors, windows and very narrow passages. Typical range at 2.5 m mounting height is up to 10 m.
Recipient :
* Required fields
or Cancel
JS-7902 is an alternative optical lens for PIR detectors that produces a narrow vertical "curtain" detection pattern instead of a broad coverage area. It is used to create a detection barrier to register crossings through a defined line (e.g. doorways or narrow corridors).
By narrowing the detection field the lens helps avoid unwanted alarms from movement outside the guarded curtain (for example small pets moving along the floor or general activity in the room). After fitting an alternative lens always check the detector manual and run functional coverage tests in the target environment.
The lens is listed as an accessory for multiple Jablotron PIR detectors. Replacing the standard lens changes the detector's coverage and may affect normative compliance for some models (the manufacturer warns to verify conformity after lens replacement). Test coverage and sensitivity on site after installation.
Applications: creating virtual barriers at entrances, protecting windows or monitoring very narrow aisles where a vertical detection curtain is required.
Reference: JA-SOLO C3
Manufacturer: JABLOTRON ALARMS S.A.
For EI208W and EI208DW CO detectors.
Reference: JA-193PL-F-M-W
Manufacturer: JABLOTRON ALARMS S.A.
Frame for wall mounting detector box, white, medium
Reference: JA-191PL
Manufacturer: JABLOTRON ALARMS S.A.
Jointed holder for JA-1x1P and JA-1x2P PIR detectors
Reference: JA-193PL-F-S-G
Manufacturer: JABLOTRON ALARMS S.A.
Frame for wall mounting detector box, gray, small
Reference: JA-193PL-F-S-W
Manufacturer: JABLOTRON ALARMS S.A.
Frame for wall mounting detector box, white, small
Reference: JA-193PL-F-M-G
Manufacturer: JABLOTRON ALARMS S.A.
Frame for wall mounting detector box, grey, medium
Reference: SD-TESTER
Manufacturer: JABLOTRON ALARMS S.A.
Test spray for smoke and heat detectors, 150 ml
Reference: GBT-212
Manufacturer: JABLOTRON ALARMS S.A.
For testing acoustic glass-break detectors.
Reference: JS-7920
Manufacturer: JABLOTRON ALARMS S.A.
JS-7920 is an alternative grey lens for PIR detectors of the JA-1x2P and...
Reference: JA-196PL-L
Manufacturer: JABLOTRON ALARMS S.A.
The bracket has been designed for the installation of a dual PIR and MW...
Reference: GS-208-CO
Manufacturer: JABLOTRON ALARMS S.A.
This is a plug-in module designed for direct integration in the Ei208W or...
Reference: PLV-P-ST
Manufacturer: JABLOTRON ALARMS S.A.
Universal ceiling circular spacer, for smoke and temperature detectors
Reference: BAT-3V0-CR2354
Manufacturer: JABLOTRON ALARMS S.A.
Lithium battery type CR2354 (3.0 V / 0.56 Ah)
Reference: CP-201T-NW
Manufacturer: JABLOTRON ALARMS S.A.
The CP-201T-NW resistor temperature sensor is designed for universal use in...