> >>>>JA-122PC-AN Bus combined PIR motion detector with 90° photoverification camera - anthracite
JA-122PC-AN Bus kombinirani PIR detektor pokreta s kamerom za fotoverifikaciju od 90° - antracit View larger

JA-122PC-AN Bus combined PIR motion detector with 90° photoverification camera - anthracite

JA-122PC-AN

New product

JABLOTRON ALARMS S.A.

JA-122PC-AN is a BUS combined PIR motion detector with an integrated 90° photo‑verification camera. It detects human movement indoors and captures colour images up to 640×480 px, stored in internal memory and forwarded to the control panel for sending to MyJABLOTRON or an ARC.

More details

More info

JA-122PC-AN is a wired (BUS) combined PIR motion detector with a built‑in 90° camera for photo‑verification. It is intended for indoor intrusion detection and provides visual confirmation of alarms by capturing colour images in two resolutions: LQ 320×240 and HQ 640×480 pixels.

The camera includes a visible flash for low‑light conditions. Images are saved in the detector’s internal memory and forwarded to the control panel; from there they can be transferred to MyJABLOTRON or an ARC. Access and detailed handling of stored photos is available via the F‑Link (JA‑100‑Link) software when logged in as an Administrator or service technician.

The detector occupies one system position and must be installed and commissioned by a trained, certified technician. Photo‑verification is available only after system registration in MyJABLOTRON or when ARC service is activated.

Depending on the detector reaction settings, the camera can be triggered multiple times during an event: in the “Instant” reaction it may activate up to 3 times (each activation up to 3 photos, maximum 9 photos sent to the control panel). In the “Delayed” mode the first activation may capture up to 2 photos. Photo transfer times depend on network conditions (see technical data).

Technical specifications

  • Power: 12 V BUS (8...15 V).
  • Current consumption: nominal for backup calculation 5 mA; maximum for cable choice 250 mA (high flash intensity).
  • Recommended installation height: 2.5 m above floor level.
  • PIR detection angle / coverage: 90° / 12 m.
  • Horizontal camera angle: 90°; flash range up to max. 3 m.
  • Camera resolution: LQ 320×240; HQ 640×480 px. Photo size LQ/HQ: 5–20 kB / 5–64 kB.
  • Typical (LQ) photo transmission time to control panel: up to 20 s (10 s). Ideal (HQ): up to 130 s (60 s).
  • Typical photo transfer time to server: 15 s (GPRS); 2 s (LAN).
  • Dimensions, weight: 150 × 65 × 44 mm, 125 g.
  • Classification: Security grade 2 / Environmental class II (EN 50131‑1).
  • Operating temperature: -10 °C to +40 °C. Average operating humidity: 75% RH, without condensation.
  • Certification: Trezor Test s.r.o. (no. 3025). Compliant with EN 50131‑1, EN 50131‑2‑2, EN 50130‑4, EN 55032, EN IEC 63000.
  • Recommended screw: 2 × ø 3.5 × 40 mm (countersunk head).

When planning installations, allow for the detector’s peak current during flash activation and follow Jablotron installation guidelines. Commissioning and integration into the Jablotron 100 series should be performed by an authorised installer.

30 other products in the same category:

Follow us on Facebook

Facebook

Information

gertgrtgrtgrftz

My account

Newsletter

Follow us

For the best possible shopping experience and optimization of the offer to users, we use various services that use cookies and similar technologies, some of which are absolutely necessary for the operation of this website and do not require consent. Others are used to analyze and improve your user experience, and we and our partners use them to display relevant content in order to provide the best possible information.

By accepting, you agree to the use of analytics services to improve your user experience and display relevant content. You can reject all offered settings or only unnecessary ones or edit your selection at any time in the cookie settings.

Reject.
close