JA-162PB-GR Bežični kombinirani PIR detektor pokreta i loma stakla - sivi View larger

JA-162PB-GR Wireless combined PIR motion and glass-break detector - grey

JA-162PB-GR

New product

JABLOTRON ALARMS S.A.

Wireless component of the JABLOTRON system for indoor motion and glass-break detection. Combines a PIR sensor and a GBS acoustic sensor in one housing and occupies two panel positions. Recommended battery: BAT-3V0-CR123A. Installation by a certified technician.

More details

More info

The JA-162PB-GR is a wireless combined detector designed for indoor use that integrates a Passive Infra‑Red (PIR) motion sensor and an acoustic Glass Break Sensor (GBS) in a single enclosure. The two sensors are evaluated independently and therefore the device occupies two positions in the control panel for zoning and event handling.

The detector communicates using the JABLOTRON radio protocol at 868.1 MHz and achieves an RF range of up to 500 m in open areas. Recommended mounting height is 2.2–2.5 m for optimal coverage. The unit should be installed and commissioned by a trained, certified technician.

Avoid installing the detector directly facing windows or spotlights and in locations with strong air flow (ventilation, air-conditioning outlets, leaking doors, etc.) as these conditions may affect detection reliability. Power is supplied by 2× CR123A lithium batteries; use of the distributor battery BAT-3V0-CR123A is recommended to ensure expected battery lifetime.

Technical specifications

  • Power: 2× CR123A lithium batteries (3.0 V / 1.5 Ah). Batteries not included.
  • Typical battery lifetime: approx. 3 years; low battery voltage <2.7 V.
  • Quiescent current: 50 µA; maximal current: 50 mA.
  • Communication band: 868.1 MHz, JABLOTRON protocol; RF range up to 500 m (open area).
  • PIR detection angle/range: 90° / 12 m; GBS detection angle/range: 90° / 9 m.
  • Dimensions: 150 × 63 × 40 mm; weight (without batteries): 135 g.
  • Classification: Security grade 2 / Environmental class II (EN 50131-1).
  • Operating range: -10 °C to +40 °C; average operational humidity 75% RH, non‑condensing.
  • Compliance and certification: ETSI EN 300 220-1,2; EN 50130-4; EN 55032; EN IEC 62368-1; EN IEC 63000; EN 50131-1; EN 50131-2-2; EN 50131-2-7-1; EN 50131-5-3; EN 50131-6. Certification body: Trezor Test s.r.o. (no. 3025).
  • Recommended mounting screws: 2 × ø 3.5 × 40 mm (countersunk head).

The detector is compatible with JA-100+ control panels (e.g. JA-102K, JA-103K, JA-107K and newer models) and is intended for locations where combined motion and glass-break protection is required.

30 other products in the same category:

Follow us on Facebook