JAB Modul za spajanje   Ei208W(D) CO detektora, bežični JA-150G-CO View larger

Module for CO detector JA-150G-CO

JA-150G-CO

New product

JABLOTRON ALARMS S.A.

JA-150G-CO is a plug‑in wireless module for direct installation into a standalone Ei208W or Ei208DW CO detector. It connects the detector to the JABLOTRON 100+ system and transmits alarm, detector activation and battery status.

More details

Data sheet

Connection method Wireless

More info

The JA-150G-CO is a compact plug‑in radio interface designed to be installed directly into a standalone Ei208W or Ei208DW carbon monoxide detector. Once fitted, the detector communicates wirelessly with the JABLOTRON 100+ system and reports key detector events to the control panel.

The module transmits alarm activation (CO detection), manual/test activations and the detector battery status. It is addressable and occupies one address slot within the system.

Power for the module is taken from the detector battery; no separate power supply is required. Operating parameters include a communication frequency of 868.1 MHz using the Jablotron protocol, maximum RF power (ERP) of 6 mW and an approximate open‑area range of 300 m.

Key technical data:

  • Power: from Ei208(D)W battery
  • Communication frequency: 868.1 MHz (Jablotron protocol)
  • Maximum RF power (ERP): 6 mW
  • RF range: ≈ 300 m (open area)
  • Dimensions: 109 × 24 × 22 mm
  • Operating temperature: -10 °C to +40 °C
  • Environmental class: II (indoor general, EN 50131-1)

Compatibility note: check product labels and versions before installation. When replacing equipment at end of life, Jablotron documentation advises replacing both the CO detector and the radio module together to avoid potential incompatibilities with older devices.

Download

30 other products in the same category:

Follow us on Facebook