JAB Modul za spajanje Ei208W(D) CO detektora, BUS JA-110G-CO View larger

 Bus module JA-110G-CO

JA-110G-CO

New product

JABLOTRON ALARMS S.A.

Plug-in BUS module for direct installation into a standalone Ei208W or Ei208DW CO detector. Enables BUS connection to the JABLOTRON 100+ system and transmits alarm activation/deactivation and detector battery status. Occupies one system position.

More details

Data sheet

Connection method BUS

More info

JA-110G-CO is a plug-in BUS module intended for direct installation into a standalone Ei208W or Ei208DW carbon monoxide detector. Once fitted, the module enables the detector’s communication over the BUS to the JABLOTRON 100+ control panel and reports alarm activation, deactivation and the detector battery status.

The module occupies one position in the system. Enrolment into the system can be done by entering the module production code via the F-Link software; the production code is printed on a label attached to the module PCB.

Installation and commissioning should be performed by a trained and certified technician in accordance with the detector installation manual to ensure correct operation and testing.

Technical information

  • Power: from the control panel BUS 12 V (9…15 V)
  • Current consumption (standby): 5 mA
  • Dimensions: 48 × 19 × 14 mm
  • Operating temperature: -10 °C to +40 °C
  • Environmental class: II (indoor general, acc. EN 50131‑1)
  • Compliance: EN 50130‑4, EN 55022, EN 50581

The JA-110G-CO provides centralized monitoring of a previously standalone CO detector, allowing the alarm and battery states to be recorded and managed by the JABLOTRON system without altering the detector’s sensing function. Refer to the Ei208W(D) detector manual for proper placement, testing and maintenance procedures.

Download

30 other products in the same category:

Follow us on Facebook